Ronix 8.3 Wakesurf Shaper






  • Description

    The Ronix Eight.3 Wakesurf Shaper add on makes it easier than ever to get a great surf wave behind your boat, no matter which brand or model you have.


    Evenly Weighted Boat: Stop loading ballast on just one side, instead weight the boat evenly for neutral handling and a safer ride.

    Easily Switch Sides: Simply remove the Wakesurf Shaper and move it to the other side of the boat, no more filling and draining ballast every time you switch.

    Easy Installation: Simple install that is non-permanent and doesn’t require drilling any holes in the boat.

    The Ronix Eight.3 Wakesurf Shaper easily mounts to both the starboard and port sides of your boat creating a bigger, cleaner wave on your desired surf side.

    Ballast Required
    The Wakesurf Shaper is not a replacement for ballast, and to get desirable results, ballast is still necessary to increase the displacement of the hull and make a bigger wave.The advantage of the Eight.3 Wakesurf shaper is being able to weight the boat symmetrically, and generate a wave instantly on whichever side of the boat is desired.

    The engineers and riders at Ronix have developed this wakesurf device to revolutionize the performance of your boat. This composite wedge easily mounts slightly below the water line on the outside of the boat near the stern. Place it on either the starboard or port side of your boat’s hull to get a massive surf wave on the opposite side. Extensive testing on direct drives, v-drives, and jet boats all shows any boat consistently produces an amazing wakesurf wave when coupled with this device and wakeboard ballast. This is a game changer, and will be all over the water next summer.


    Because every hull shape is different the process will be slightly different on every boat. Some are mostly flat and don’t require a shim, others have a small step in the hull and require a 1” shim while other boats have a more pronounced step and need the included 2” shim. Be sure to measure the furthest back/lowest corner of your hull to gauge what set up you need. The block must be at least 80% below the waterline when mounted. If the block is above that line increase the amount of ballast in the stern of the boat.

    Two adhesive backed high strength velcro strips will be installed onto the hull creating a landing strip for the Wakesurf Shaper. Skeptics believe this will not be strong enough to keep the block connected but they are wrong. As water travels over the surface, it will push the face of the block against the hull for maximum hold.

    What’s Included

    • Eight.3 Wakesurf Shaper
    • 1″ Shim
    • 2″ Shim
    • High Strength Velcro Strips
    • Installation Instructional Video

Finance Now
tweet like plus one


To request more information regarding this item, please complete and submit the form below.